Proposed Language For Regulation No. 6, Part A

Subpart A	General Provisions 40 C.F.R. Part 60 (July 1, 2005), and as amended on ) December 15, 2005 (70 FR 74679). 
See Part B, Section I.B. and I.C. of this Regulation Number 6 for Additional Requirements Regarding Modifications)
Subpart Cb	Emission Guidelines and Compliance Times for Existing Sources: Municipal Waste Combustors That Are Constructed On or Before September 20, 1994. 40 C. F. R. Part 60 (July 1, 2005).
Subpart Cc	Emission Guidelines and Compliance Times for Municipal Solid Waste Landfills.  40 C.F.R. Part 60 (July 1, 2005.  
In addition for clarification regarding requirements applicable to existing municipal solid waste landfills, designated facilities as defined in 40 CFR 60.32c which meet the condition in 40 CFR 60.33c(a)(1) shall submit to the Division an initial design capacity report and an initial emission rate report in accordance with 40 CFR 60.757 within 90 days of the effective date of this regulation.  If the design capacity report reflects that the facility meets the condition in 40 CFR 60.33c(a)(2) and the initial NMOC emission rate report reflects that the facility meets the condition in 40 CFR 60.33c(a)(3), the facility shall comply with the collection and control system requirements in  40 CFR 60.752(b)(2)(ii), applicable control device requirements in 40 CFR 60.33c(c)(1), (2) and (3), test methods and procedures requirements in 40 CFR 60.754, operational standards in 40 CFR 60.753, compliance provisions in 40 CFR 60.755, monitoring provisions in 40 CFR 60.756 and reporting and recordkeeping provisions in 40 CFR 60.757 and 60.758, respectively.  Such facilities must complete installation of air emission collection and control equipment capable of meeting the requirements of this subpart no later than 30 months from the effective date of these requirements or the date on which the source becomes subject to this subpart pursuant to 40 CFR 60.36c(b) (the date on which the condition in 60.33c(a)(3) is met (i.e., the date of the first annual report in which the nonmethane organic compounds emission rate equals or exceeds 50 megagrams per year)), whichever occurs later. These facilities must submit a final collection and control system design plan pursuant to 40 CFR 60.757(c) within one year of the effective date of these requirements, which must be reviewed and approved by the state.  The final collection and control system design plan must specify: (1) the date by which contracts for control systems/process modifications shall be awarded, (which shall be no later than 20 months after the effective date); (2) the date by which on-site construction or installation of the air pollution control device(s) or process changes will begin, (which shall be no later than 24 months after the effective date); and (3) the date by which the construction or installation of the air pollution control device(s) or process changes will be complete (which shall be no later than 30 months after the effective date).  In addition, the plan shall include site-specific design plans for the gas collection and control system(s).  These facilities shall comply with the approved final collection and control system design plan and shall demonstrate compliance with these emission standards in accordance with 40 CFR 60.8 not later than 180 days following initial startup of the collection and control system.  The Commission designates the effective date for these requirements applicable to designated facilities, including the state emission standard for existing municipal solid waste landfills, as the date on which the United States Environmental Protection Agency promulgates a final rule approving the state plan under section 111(d) of the Clean Air Act.
Subpart Ce	Emission Guidelines and Compliance Times for Hospital/Medical/Infectious Waste Incinerators.  40 CFR Part 60, subpart Ce, 40 C.F.R. Part 60 (July 1, 2005) Paragraphs 60.31e, 60.32e, 60.33e, 60.34e, 60.35e, 60.36e, 60.37e, 60.38e, 60.39e.
The Commission designates the effective date for these requirements applicable to designated facilities as the date on which the United States Environmental Protection Agency promulgates a final rule approving the state plan (which can be obtained from the Air Quality Control Commission office) under section 111(d) of the Clean Air Act.  Designated facilities shall comply with all requirements of this Subpart Ce on or before one year from the effective date for these requirements.
Subpart D	Standards of Performance for Fossil-Fuel-Fired Steam Generators for which Construction is Commenced after August 17, 1971. 40 C.F.R. Part 60 (July 1, 2005).
Subpart Da	Standards of Performance for Electric Utility Steam Generators for which Construction is Commenced after September 18, 1978.  40 C.F.R. Part 60 (July 1, 2005) and as amended on August 30, 2005 (70 FR 51266), and February 27, 2006 (71 FR 9867).
Subpart Db	Standards of Performance for Industrial-Commercial-Institutional Steam Generating Units. 40 C.F.R. Part 60 (July 1, 2005) and as amended on February 27, 2006 (71 FR 9867).
(See Part B, Section III.D. of this Regulation Number 6 for Additional Requirements)
Subpart Dc	Standards of Performance for Small Industrial-Commercial- Institutional Steam Generating Units.  40 C.F.R. Part 60 (July 1, 2005) and as amended on  December 16, 2005 (70 FR 74679) and February 27, 2006 (71 FR 9867).
Subpart E	Standards of Performance for Incinerators.  40 C.F.R. Part 60 (July 1, 2005).
(See Part B, Sections V, VI and VII of this Regulation No. 6 for Additional Requirements).  
Subpart Ea	Standards of Performance for Municipal Waste Combustors For Which Construction Is Commenced After December 20, 1989 and On or Before September 20, 1994.  40 C.F.R. Part 60 (July 1, 2005).
Subpart Eb	Standards of Performance for Municipal Waste Combustors For Which Construction Is Commenced After September 20, 1994.   40 C.F.R. Part 60 (July 1, 2005).

(See Part B, Section VI of this Regulation No. 6 for Additional Requirements)
Subpart Ec	Standards of Performance for Hospital/Medical/Infectious Waste Incinerators for Which Construction is Commenced After June 20, 1996.  40 CFR Part 60, Subpart Ec, 40 C.F.R. Part 60 (July 1, 2005).
(See Part B, Section V of this Regulation No. 6  for Additional Requirements)
Subpart F	Standards of Performance for Portland Cement Plants.  40 C.F.R. Part 60 (July 1, 2005).
Subpart G	Standards of Performance for Nitric Acid Plants.  40 C.F.R. Part 60 (July 1, 2005).
Subpart H	Standards of Performance for Sulfuric Acid Plants.  40 C.F.R. Part 60 (July 1, 2005).
Subpart I	Standards of Performance for Hot Mix Asphalt Facilities.  40 C.F.R. Part 60 (July 1, 2005).
Subpart J	Standards of Performance for Petroleum Refineries. 40 C.F.R. Part 60 (July 1, 2005).
Subpart K	Standards of Performance for Storage Vessels for Petroleum Liquids Constructed after June 11, 1973 and prior to May 19, 1978.  40 C.F.R. Part 60 (July 1, 2005).
Subpart Ka	Standards of Performance for Storage Vessels for Petroleum Liquids Constructed after May 18, 1978, and prior to July 23, 1984.  40 C.F.R. Part 60 (July 1, 2005).
Subpart Kb	Standards of Performance for Volatile Organic Liquid Storage Vessels (Including Petroleum Liquid Storage Vessels) for which Construction, Reconstruction, or Modification Commenced after July 23, 1984. 40 C.F.R. Part 60 (July 1, 2005).
Subpart L	Standards of Performance for Secondary Lead Smelters.  40 C.F.R. Part 60 (July 1, 2005). 
Subpart M	Standards of Performance for Secondary Brass and Bronze Production Plants.  40 C.F.R. Part 60 (July 1, 2005).
Subpart N	Standards of Performance for Iron and Steel Plants.  40 C.F.R. Part 60 (July 1, 2005).
Subpart Na	Standards of Performance for Basic Oxygen Process Furnaces.  40 C.F.R. Part 60 (July 1, 2005).
Subpart O	Standards of Performance for Sewage Treatment Plants.  40 C.F.R. Part 60 (July 1, 2005).
Subpart P	Standards of Performance for Primary Copper Smelters.  40 C.F.R. Part 60 (July 1, 2005).
Subpart Q	Standards of Performance for Primary Zinc Smelters.  40 C.F.R. Part 60 (July 1, 2005).
Subpart R	Standards of Performance for Primary Lead Smelters.  40 C.F.R. Part 60 (July 1, 2005).
Subpart S	Standards of Performance for Primary Aluminum Reduction Plants.  40 C.F.R. Part 60 (July 1, 2005).
Subpart T	Standards of Performance for the Phosphate Fertilizer Industry:  Wet-Process Phosphoric Acid Plants.  40 C.F.R. Part 60 (July 1, 2005).
Subpart U	Standards of Performance for the Phosphate Fertilizer Industry:  Superphosphoric Acid Plants.  40 C.F.R. Part 60 (July 1, 2005).
Subpart V	Standards of Performance for the Phosphate Fertilizer Industry:  Diammonium Phosphate Plants.  40 C.F.R. Part 60 (July 1, 2005).
Subpart W	Standards of Performance for the Phosphate Fertilizer Industry:  Triple Superphosphate Plants.  40 C.F.R. Part 60 (July 1, 2005).
Subpart X	Standards of Performance for the Phosphate Fertilizer Industry:  Granular Triple Superphosphate Storage Facilities.  40 C.F.R. Part 60 (July 1, 2005).
Subpart Y	Standards of Performance for Coal Preparation Plants.  40 C.F.R. Part 60 (July 1, 2005).
Subpart Z	Standards of Performance for Ferroalloy Production Facilities.  40 C.F.R. Part 60 (July 1, 2005).
Subpart AA	Standards of Performance for Steel Plants:  Electric Arc Furnaces Constructed after October 21, 1974, and on or before August 17, 1983.  40 C.F.R. Part 60 (July 1, 2005).
Subpart AAa	Standards of Performance for Steel Plants:  Electric Arc Furnaces and Argon-Oxygen Decarburization Vessels Constructed after August 17, 1983.  40 C.F.R. Part 60 (July 1, 2005).
Subpart BB	Standards of Performance for Kraft Pulp Mills.  40 C.F.R. Part 60 (July 1, 2005).
Subpart CC	Standards of Performance for Glass Manufacturing Plants.  40 C.F.R. Part 60 (July 1, 2005).
Subpart DD	Standards of Performance for Grain Elevators.  40 C.F.R. Part 60 (July 1, 2005).
Subpart EE	Standards of Performance for Surface Coating of Metal Furniture.  40 C.F.R. Part 60 (July 1, 2005).
Subpart GG	Standards of Performance for Stationary Gas Turbines.  40 C.F.R. Part 60 (July 1, 2005), and as amended on  February 24, 2006 (71 FR 9453).
Subpart HH	Standards of Performance for Lime Manufacturing Plants.  40 C.F.R. Part 60 (July 1, 2005).
Subpart KK	Standards of Performance for Lead-Acid Battery Manufacturing Plants.  40 C.F.R. Part 60 (July 1, 2005).
Subpart LL	Standards of Performance for Metallic Mineral Processing Plants.  40 C.F.R. Part 60 (July 1, 2005).
Subpart MM	Standards of Performance for Automobile and Light-Duty Truck Surface Coating Operations.  40 C.F.R. Part 60 (July 1, 2005).
Subpart NN	Standards of Performance for Phosphate Rock Plants.  40 C.F.R. Part 60 (July 1, 2005).
Subpart PP	Standards of Performance for Ammonium Sulfate Manufacture.  40 C.F.R. Part 60 (July 1, 2005).
Subpart QQ	Standards of Performance for the Graphic Arts Industry:  Publication Rotogravure Printing.  40 C.F.R. Part 60 (July 1, 2005).
Subpart RR	Standards of Performance for Pressure Sensitive Tape and Label Surface Coating Operations.  40 C.F.R. Part 60 (July 1, 2005).
Subpart SS	Standards of Performance for Industrial Surface Coating:  Large Appliances.  40 C.F.R. Part 60 (July 1, 2005).
Subpart TT	Standards of Performance for Metal Coil Surface Coating.  40 C.F.R. Part 60 (July 1, 2005).
Subpart UU	Standards of Performance for Asphalt Processing and Asphalt Roofing Manufacture.  40 C.F.R. Part 60 (July 1, 2005).
Subpart VV	Standards of Performance for Equipment Leaks of VOC in the Synthetic Organic Chemicals Manufacturing Industry.  40 C.F.R. Part 60 (July 1, 2005).
Subpart WW	Standards of Performance for the Beverage Can Surface Coating Industry.  40 C.F.R. Part 60 (July 1, 2005).
Subpart XX	Standards of Performance for Bulk Gasoline Terminals.  40 C.F.R. Part 60 (July 1, 2005).
Subpart BBB	Standards of Performance for the Rubber Tire Manufacturing Industry.  40 C.F.R. Part 60 (July 1, 2005).
Subpart DDD	Standards of Performance for Volatile Organic Compound (VOC) Emissions from the Polymer Manufacturing Industry.  40 C.F.R. Part 60 (July 1, 2005).
Subpart FFF	Standards of Performance for Flexible Vinyl and Urethane Coating and Printing.  40 C.F.R. Part 60 (July 1, 2005).
Subpart GGG	Standards of Performance for Equipment Leaks of VOC in Petroleum Refineries.  40 C.F.R. Part 60 (July 1, 2005).
Subpart HHH	Standards of Performance for Synthetic Fiber Production Facilities.  40 C.F.R. Part 60 (July 1, 2005).
Subpart III	Standards of Performance for Volatile Organic Compound (VOC) Emissions From Synthetic Organic Chemical Manufacturing Industry (SOCMI) Air Oxidation Unit Processes (July 1, 2005).
Subpart JJJ	Standards of Performance for Petroleum Dry Cleaners.  40 C.F.R. Part 60 (July 1, 2005).
Subpart KKK	Standards of Performance for Equipment Leaks of VOC from Onshore Natural Gas Processing Plants.  40 C.F.R. Part 60 (July 1, 2005).
Subpart LLL	Standards of Performance for Onshore Natural Gas Processing:  SO2 Emissions.  40 C.F.R. Part 60 (July 1, 2005).
Subpart NNN	Standards of Performance for Volatile Organic Compound Emissions from Synthetic Organic Chemical Manufacturing Industry Distillation Operations.  40 C.F.R. Part 60 (July 1, 2005). 
Subpart OOO	Standards of Performance for Nonmetallic Mineral Processing Plants.  40 C.F.R. Part 60 (July 1, 2005).
Subpart PPP	Standards of Performance for Wool Fiberglass Insulation Manufacturing Plants.  40 C.F.R. Part 60 (July 1, 2005).
Subpart QQQ	Standards of Performance for VOC Emissions from Petroleum Refinery Wastewater Systems.  40 C.F.R. Part 60 (July 1, 2005).
Subpart RRR	Standards of Performance for Volatile Organic Compounds (VOC) Emissions from Synthetic Organic Chemical Manufacturing Industry (SOCMI) Reactor Processes. 40 C.F.R. Part 60 (July 1, 2005). 
Subpart SSS	Standards of Performance for the Magnetic Tape Manufacturing Industry.  40 C.F.R. Part 60 (July 1, 2005).
Subpart TTT	Standards of Performance for Industrial Surface Coating of Plastic Parts for Business Machines.  40 C.F.R. Part 60 (July 1, 2005).
Subpart UUU	Standards of Performance for Calciners and Dryers in Mineral Industries.  40 C.F.R. Part 60 (July 1, 2005).
Subpart VVV	Standards of Performance for Polymeric Coating of Supporting Substrates.  40 C.F.R. Part 60 (July 1, 2005).
Subpart WWW	Standards of Performance for Municipal Solid Waste Landfills.  40 C.F.R. Part 60 (July 1, 2005).
Subpart AAAA	Standards of Performance for Small Municipal Waste Combustion Units for which Construction is Commenced after August 30, 1999 or for which Modification or Reconstruction is Commenced after June 6 2001.  40 C.F.R. Part 60 (July 1, 2005).  
Subpart CCCC	Standards of Performance for Commercial and Industrial Solid Waste Incineration Units for which Construction is Commenced after November 30, 1999 or for which Modification or Reconstruction is Commenced on or after June 1, 2001.  40 C.F.R. Part 60 (July 1, 2005). 
Subpart EEEE	Standards of Performance for Other Solid Waste Incineration Units for which Construction is Commenced After December 9, 2004, or for Which Modification or Reconstruction is Commenced on or After June 16, 2006.   40 C.F.R. Part 60 (December 16, 2005, 70 FR 74870).    

APPENDIX A	Test Methods. 40 C.F.R. Part 60 (July 1, 2005).
APPENDIX B	Performance Specifications.  40 C.F.R. Part 60 (July 1, 2005).
APPENDIX C	Determination of Emission Rate Change.  40 C.F.R. Part 60 (July 1, 2005).
APPENDIX D	Required Emission Inventory Information.  40 C.F.R. Part 60 (July 1, 2005).
APPENDIX F	Quality Assurance Procedures.  40 C.F.R. Part 60 (July 1, 2005).
APPENDIX I	Removable Label and Owner's Manual.  40 C.F.R. Part 60 (July 1, 2005).

VIII.	Adopted:  September 21, 2006
This Statement of Basis, Specific Statutory Authority and Purpose complies with the requirements of the Colorado Administrative Procedures Act, section 24-4-103, C.R.S. and the Colorado Air Pollution Prevention and Control Act, section 25-7-110.5, C.R.S.
Annual Update
Basis

The EPA promulgated a new federal NSPS for Other Solid Waste Incineration Units (OSWI) on December 16, 2005 at 40 C.F.R. Part 60, Subpart EEEE.  In addition, EPA promulgated amendments to the following standards: 40 C.F.R. Part 60, subparts Cb, Da, Db, Dc, AA, AAa, GG, and Appendix B.  
The State of Colorado is required under Sections 110 of the Federal Clean Air Act, as amended, to adopt such NSPS and Emission Guidelines into its regulations in order to maintain agency authority with regard to the Standards.  
Specific Statutory Authority

The general authority for this regulation is contained in the Colorado Air Pollution Prevention and Control Act.  Sections 25-7-105(1)(b).   Specific authority is found at 25-7-109, which provides authority to adopt emission control regulations.  Section 25-7-106(6) provides the Commission authority to require testing, monitoring and record keeping.  Commission action in promulgating these revisions is taken pursuant to Sections 25-7-105 to -109 and 25-7-114, C. R. S., as amended.
Purpose

Adoption by reference of amendments to the federal regulations at 40 C.F.R. Part 60, Subparts Cb, Da, Db, Dc, AA, AAa, GG, and Appendix B will make these revised standards enforceable under Colorado law. Adoption of the amendments will not impose upon sources additional requirements beyond the minimum required by federal law, and may benefit the regulated community by providing sources with up-to-date information.